ArexA PRO-Concrete

ArexA PRO-Beton

Permanent surface protection

ArexA-PRO-Concrete hardens concrete surfaces and protects them from deterioration as well as chlorides and aggressive liquids. The protection is breathable, long lasting and acid resistant.

ArexA-PRO-Concrete is a surface sealing and protection treatment for exposed concrete areas like e.g. industrial and parking floors. ArexA-PRO-Concrete is used to increase firmness of surfaces and dust binding during mechanical grinding and polishing procedures. The result is a strongly resistant and scratch-resistant surface.

ArexA-PRO-Concrete is a surface sealing and protection treatment for exposed concrete areas like e.g. industrial and parking floors. ArexA-PRO-Concrete is used to increase firmness of surfaces and dust binding during mechanical grinding and polishing procedures. The result is a strongly resistant and scratch-resistant surface.
ArexA-PRO-Concrete penetrates deeply into the capillaries, micro-cracks and pores. The chemical reaction between salts and minerals makes sure that a very strong potassium silicate hydrate compound is generated. Subsequently, a crystalline structure is developed, which prevents from water penetration but allows capillary diffusion. Due to the fact that the protection penetrates deeply into the concrete, it is immune to outer influences like abrasion and impacts.

Area of application

  • Concrete in exposed surroundings
  • Streets, bridges, tunnels
  • Parking areas and garages
  • Water supply and waste water facilities
  • Industrial and storage floors
  • Marine facilities
  • Car wash facilities and workshops
  • Deep-freeze rooms
  • Agricultural silos
  • Biogas plants
  • Saw and paper mills
  • Recycling plants and waste deposits
  • Balconies and stairs

Advantages

  • Application is easy and unproblematic.
  • Odorless
  • Environmental friendly
  • Breathable
  • Acid resistant
  • Elongated durability
  • Reduced service necessity
  • Dust binding
  • Easy cleaning

Application

ArexA-PRO-Concrete is ready to use, must not be mixed with other liquids or diluted. Shake the cask well before use. The surface to be treated must be free from dust, paint or any coatings, which possibly affects the absorbability of the material. Damages or visible cracks (>1.0 mm) have to be repaired before application. Protect glass, aluminum, polished or lacquered surfaces from etching. Cleanse splattered areas with water and if necessary with an alkaline solution.
The minimum temperature during application and 24 hours after has to be more than + 5°C. Avoid direct solar irradiation during application.

Use a standard low-pressure sprayer or a roller for a simple application. Provide two application within 5 to 15 minutes until a complete saturation is achieved. Please note that the drizzle expands widely when applied and can damage glass surfaces. ArexA-PRO-Concrete can be poured on horizontal surfaces and spread evenly on the surface with the help of a scraper, brush or cloth. Avoid dry spots during application. Remove deposits to avoid possible shiny or white spots.

Nach oben